XLeRobot#
Open-source Household Dual-arm Mobile Robot
Bring Embodied AI to Every Developer Around the World!
Built upon the giants: LeRobot, SO-100/SO-101, Lekiwi, Bambot
~$660
Total cost, basic version
<4 hrs
Total assembly time
~12 kg
Easily lifted by an adult
10 hrs+
Normal operation on one charge
Why XLeRobot?#
XLeRobot = XL + LeRobot
Core
LeRobot
- 2× SO-100/SO-101 arms90% 3D printed, affordable motors
- LeRobot softwarepip install and a few lines of code
- LeRobot communitySOTA VLA models, datasets and tools
Enhancement
XL
- IKEA RÅSKOG cartSturdy, global, household height
- Omni-wheel baseUpgrade directly from Lekiwi
- Anker SOLIX C300288Wh, powers everything over USB-C
- Head cameraRGB, stereo or RealSense
Result
XLeRobot
A practical low-cost household dual-arm mobile robot.
~$660<4 hrs assembly~12 kgCheap Materials 💴: 90% 3D printed components with affordable motors and electronics.
Easy Assembly 🔨: 67 min to assemble 2 SO101 arms and configure motors.
Plug-&-Play 🧩: Get robots running with simple pip install and a few lines of code.
Thriving LeRobot Community 🌍: World’s largest low-cost robotics community featuring
Multiple SOTA VLA models🧠, datasets📊, and tools🔨 ready for deployment.
10k+ members for brainstorming and discussions🧑🤝🧑.
🏠 The field/market lacks affordable, stable, dual-arm home robots that match LeRobot’s ease of assembly.
🖨️ Traditional 3D printed chassis suffer from limited durability, stability, and load capacity — impractical for daily use.
⚡ DIY mobile robots face power supply challenges, leading to complex wiring setups.
Overall Advantages
Cost-effective: Complete build costs $660, or directly upgrade from your SO101 Arm and Lekiwi for $250.
Easy upgrade from Lekiwi and SO-100/SO-101
Hardware: No motor ID changes or mods needed
Software: Same tabletop single/dual-arm setup—transfer your policies directly from SO101 arm
Practical and reliable: Performs many daily tasks comparable to $30,000 closed-source robots.
More tasks demonstrated in the Huggingface LeRobot World-wide Hackathon.
Note: Not currently designed for in-hand dexterity 🤹, heavy lifting (over 1kg per arm) 🏋️, or highly dynamic movements (catch ball) 🏃
Rich open-source resources
LeRobot’s plug-and-play code🧩 and extensive AI model library🧠
Backed by an active, growing community of contributors🧑🤝🧑
Safety always matters: XLeRobot has inherent physical hardware limitations (low-torque motors, short arm length, wheel-based), making it physically almost incapable of harming humans, while still maintaining its ability to perform many household tasks.
Get started#
From a box of parts to a robot that learns. Each step links to its guide.
- 01Bill of MaterialOrder the parts, about $660 for the basic version.
- 023D PrintingPrint the arm, base and head parts.
- 03AssemblyUnder 4 hours in total.
- 04Install softwareLeRobot plus the XLeRobot plugins.
- 05TeleoperateDrive both arms and the base.KeyboardXboxJoyconVR
- 06Learn and deployTrain policies or run an LLM agent.ACTSmolVLAπ0.5RL
Cost#
Buy the parts yourself, then add only what you need.
Estimated total
~$660
Prices are approximate and exclude 3D printing, tools, shipping and taxes.
Price (Buy Parts Yourself) |
US |
EU |
CN |
IN |
|---|---|---|---|---|
Basic (use your laptop, single RGB head cam) |
~$660 |
~€680 |
~¥3999 |
~₹87000 |
↑ Stereo dual-eye RGB head cam |
+$30 |
+€30 |
+¥199 |
+₹6550 |
+ RaspberryPi |
+$79 |
+€79 |
+¥399 |
+₹7999 |
↑ RealSense RGBD head cam |
+$220 |
+€230 |
+¥1499 |
+₹35726 |
The developer assembly kit went on sale on 2025-09-09. See News for purchase links.
Who is XLeRobot For?#
Startups & Labs: Build prototypes faster with one of the world’s cheapest general robotics platform
Self Researchers: Experiment with embodied AI without breaking the bank 💸
Educators:
High School Teachers: Bring cutting-edge robotics to STEM classes 🧪
University Professors: Affordable platform for robotics/AI courses 📚
Students: From beginners to researchers 🎒→🎓
DIY Enthusiasts: Perfect for indoor projects - plant care, delivery bots, home automation 🌱📦
News#
From the first demo to today.
0.1.0
First demo: where XLeRobot started.
0.2.0
2025-06-13
Hardware setup fully capable for household tasks, with 660$ cost.
0.3.0
2025-08-30
Final outfit touch up and household chores showcase demos.
0.4.0
2025-12 / 2026-01
Dual-wheel base, modular arm base, 360° compact head. The last version fully based on Feetech servos.
Next
More product-level, low-cost open-source mobile robots on higher-performance motors, with Hightorque and Wowrobo.
2026-10-06
XLeRobot installs as a LeRobot plugin
The robots (xlerobot, xlerobot_2wheels, xlerobot_mecanum) and the VR teleoperator install with pip and work with any LeRobot CLI command, e.g. --robot.type=xlerobot.

2026-09-24
New Community page
9 research papers and 34 community projects that use or extend XLeRobot, searchable in English and Chinese.

2026-04-21
Mecanum wheel base
Holonomic drive (strafe and turn in place) with four drive motors, on the same hardware stack as the dual-wheel version. Contributed by the community (#135).
2026-02-01
Web MuJoCo simulation
Play with XLeRobot instantly in the browser, using the MuJoCo engine and 3DGS.
2026-01-04
XLeRobot 0.4.0, dual-wheel version
More stable, faster and stronger than three omni wheels, in servo and brushless versions, with a modular arm base and a 360° compact head. Official assembly videos from Wowrobo.

More news (9)
2025-10-17
Autonomous LLM agent
Control XLeRobot with an LLM agent that uses camera vision and voice commands to move the robot and manipulate objects.
2025-09-09
Developer Assembly kit (excluding battery and IKEA cart) ready for purchase
In China (Taobao) for 3699¥ and world-wide for 579$. (In collaboration with Wowrobo, one of the official collaborators with Huggingface SO101 arm, they have sold 5k+ SO101 arm worldwide with great customer feedbacks.)
- Non-profit, I personally don't earn any from this. I also asked Wowrobo to set the price as low as possible.
- This is only the assembly kit for developers, please check documentation website and this repo for available codes and tutorials before you purchase.
2025-09-09
Embodied AI Home Robot Hackathon
Joined Embodied AI Home Robot Hackathon (Oct 25–26, Bay Area) held by SEEED x Nvidia x Huggingface as mentor! Register HERE.
2025-08-30
XLeRobot 0.3.0 Release
With final outfit touch up and household chores showcase demos.
2025-07-30
Control XLeRobot in real life
With keyboard/Xbox/Switch joycon in the wild (bluetooth, no wifi, 0 latency).
2025-07-08
Maniskill Simulation
With URDFs, control scripts (support Quest3 VR, keyboard, Xbox, Switch Joycon). Supports for multiple sensors (depth, segmentation, tactile, etc), RL/IL/VLA environments. Get started in 15 min.
Limitations#
(Hey, for this price, what more could you ask for?)
Fixed height—adding a stable lifting platform would significantly increase cost and assembly difficulty
Smaller workspace compared to Aloha—while we try to maximize the SO101 workspace, the arm has size limitations (~40cm reach), though XLeRobot still handles most tasks effectively
Limited payload capacity (600~1000g) for a single arm
However, with all considered — cost, community support, ease of assembly, and practical utility — XLeRobot stands out as one of the most compelling low-cost robot for indoor application!
Contribute#
👋 Want to contribute? Please refer to CONTRIBUTING.md for guidance on how to get involved!
Main Contributors
Gaotian/Vector Wang(myself)
Zhuoyi Lu: RL sim2real deploy, teleop on real robot (Xbox, VR, Joycon)
Nicole Yue: Documentation website setup
Yuesong Wang: Mujoco simulation assets
This is just a small brick in the pyramid, made possible by LeRobot, SO-100, Lekiwi, and Bambot. Thanks to all the talented contributors behind these detailed and professional projects.
Looking forward to collaborating with anyone interested in contributing to this project!
Citation#
If you want, you can cite this work with:
@misc{wang2025xlerobot,
author = {Wang, Gaotian and Lu, Zhuoyi and Huang, Yiyang and Liu, Yihao},
title = {XLeRobot: A Practical Low-cost Household Dual-Arm Mobile Robot Design for General Manipulation},
howpublished = "\url{https://github.com/Vector-Wangel/XLeRobot}",
year = {2025}
}
Disclaimer#
If you build, buy, or develop a XLeRobot based on this repo, you will be fully responsible for all the physical and mental damages it does to you or others.